NG6-L6X • Direct solenoid control slide valve • Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection • Wet-pin AC or DC solenoids with detachable coil • Replace coil without releasing oil • Electrical connection as individual or central connection NG10-L3X • Direct solenoid control slide valve • Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection • DC solenoid with removable coil • Replace coil without releasing oil NG10-L5X • Direct solenoid control slide valve • Installation face follow DIN 24340 A, ISO 4401 and CETOP-RP 121H sub-plate mounting connection sub-plate mounting connection • DC or AC solenoid with removable coil (using a rectifier to connect to AC) • Solenoid coil can rotate 90° • Replacing the coil does not require opening the sealed chamber • Optional time switch control function
Technical Specs
Specifications
NG6-L6X
NG10-L3X
NG10-L5X
Installation position
Optional
Ambient temperature range ℃
-30 to +50 (NBR seals)
-20 to +50 (FKM seals)
Weight
valve kg
/
/
/
Sub-Sub-plate mounting kg(G115/01A)
/
/
/
Single solenoid valve kg
1.5
Independently wiring:4.3(DC),3.5(AC)
4.3(DC)
Central monitoring station:4.4(DC),3.6(AC)
Double solenoid valve kg
2.0
Independently wiring:5.9(DC),4.3(AC)
5.9(DC)
Central monitoring station:6.0(DC),4.4(AC)
Max.operating pressure
Port A,B,P bar
350
315
350
Port T bar
210(DC),160(AC)
210(DC)
Max. flow-rate L/min
80(DC)
60(AC)
120
150
Flowarea (switching neutral position)
V type mm2
/
11(A/B → T);10.3(P → A/B)
/
Q type mm2
for symbol Q 6% of nominal cross section
2.5(A/B → T)
/
W type mm2
for symbol W 3% of nominal cross section
5.5(A/B → T)
/
Fluid
Mineral oil suitable for NBR and FKM seal
Mineral oil (HL, HLP) to DIN 51 524,suitable for NBR and FKM
Phosphate ester for FKM seal
Fluid temperature range℃
-30 to +80(NBR seal)
-20 to +80(FKM seal)
Viscosity range mm2/s
2.8 to 500
Degree of contamination
Maximum permissible degree of fluid contamination: Class 9. NAS 1638 or 20/18/15, ISO4406